Zeta Handle Bar Air Bleed Kit
Handle Bar Mounted Front Fork Air Bleed Suspension Release Valve
THE INTERNAL PRESSURE OF THE FRONT FORK CAN BE RELEASED BY A PUSHING THE BUTTON WHILE RIDING!
SPECIFICATIONS:
- This air bleed kit allows you to vent the pressure that builds up due to heat changes inside the fork during long runs such as enduro races with a single push while riding.
- The clamp can be attached to the stock lever holder on either the brake or clutch side.
- The nylon sleeve on the inside of the clamp reduces the risk of lever damage by allowing the lever holder to rotate in the event of a strong impact during a fall.
- Air hoses and one-touch joints are included to connect to the left and right front fork air bleeds.
Compatible with KYB, SHOWA and WP.
Cannot be installed on MAGURA hinge type.
Clamp: Can be mounted on either the right side (brake) or left side (clutch). Sponge filter: The air outlet is equipped with a filter. Prevents dust from entering. |
Products | Part number | Size |
![]() ![]() |
ZE91-1201 | KYB/SHOWA |
![]() ![]() |
ZE91-1202 | WP |
Air Bleed Kit Rep Filter Set 3 pack |
Part number |
![]() ![]() |
ZE91-1210 |